Payment & Shipping Terms:
|Material:||ADC 12 Aluminum||Input Wattaage:||100~300W|
|Color Temperature:||3000/4000/6500K||LED Lifetime:||50000h|
|Protection Grade:||IP66 IK08||Temperature Of Working Condition:||-40~50℃|
|Power Factor:||PF≥0.95||Installation Pipe Diameter:||φ60~70mm|
100W 120W 150W 180W 200W 240W 250W 300W
Road Outdoor LED street light housing IP66 Aluminum die-casting housing
*For this series, we designed total of three sizes models, to deal with three different wattage requirements,The minimum power can be 100 watts, the maximum can reach 300 watts.
|Color Temperature:||3000/40000/6500K||Input Voltage:||AC90 - 265V|
|Frequency Range:||50 - 60Hz||Working Ambient Temperature:||-40℃ - 50℃|
|Working Ambient Humidity:||20% - 90%RH||LED Lifetime:||50000h|
|Production Lead Time:||7-30 Days|
|Shipping:||EXW / FOB NINGBO|
|Finish Color:||Double gray;Sandy black;|
|Color Rendering Index||Ra≥70||Ra≥70||Ra≥70|
|Humidity of Working Condition||20%~90%RH||20%~90%RH||20%~90%RH|
|Installation Pipe Diameter||φ60mm||φ60mm||φ70mm|
Is there anything else you want to know about this lamp?
1.Q:What is the waterproof rating?
A:It’s can pass IP66
2.Q:How many years of warranty do you promise?
A:We guarantee the housing for 5 years.for the whole lamp,The warranty of electrical parts is depends on the warranty time of different driver brand.
3.Q:What is the grade of your powder coating?
A:Normal is C2 grade,but If the customer has special request,such as used at the seaside,in this case,we can use phosphating with Akzo powder to reach higher levels,like C3,C4.
4.Q:What's the packing you use?
A:Our packing is PE bags with foam and carton box,we will ensure it safe.
5.Q:What is your usual lead time?
A:25 days for regular products, 10 days extra for special requirements.
6. Q:Do you sell only whole lamps?Or I can just buy the empty housing?
A:It’s up to you,we can also sell empty housing,even you just by the die-casting housing without powder coating is also no problem.
7.Q:What brand of driver do you use?
A:The brand we usually use is Inventronics,Sosen these China local brand,and PHILIPS,MEANWELL these international brand,Customers can also specify brands,it’s no problem.
8.Q:About the powder coating,i have a question,What colors do you usually use?Can we customize the color?
A:The colors we usually use are black and gray,you can also customize other color,just tell us the RAL number,we will according the RAL number to do the powder coating.
9.Q:Ok,that’s good,So if I want to specify a color,will you charge extra cost?
A:will not,but we will require MOQ500 pcs.
10.Q:ok,last question,Do you accept OEM?
A:Of course we can,we have own die-casting machine and mould design team,must be able to meet your requirements,and we already have a lot of OEM customers.
· Standard AC input of 90-305V,up to 480v available
· EMI filter: 47CFR, part 2, part 15
· Power factor: >0.9
· Total harmonic distortion: <20%
· Surge protection: IEC/EN 61000-4-5 EMC test standard
· Licensed electrician required for installation
· Rugged, fully sealed, die-cast aluminum housing
· UV-resistant, multi-layer, architectural color, powder coat finish
· High impact, heat resistant, tempered lens
Energy Control Options
· Motion detection available
· Photo sensors available
Contact Person: Peggy