Payment & Shipping Terms:
|Material:||Die-casting Aluminum||Input Wattaage:||80/90/100W|
|Color Temperature:||3000/4000/6500K||LED Lifetime:||50000h|
|Protection Grade:||IK08||Temperature Of Working Condition:||-40~50℃|
|Power Factor:||PF≥0.95||Installation Pipe Diameter:||φ60~70mm|
80W Waterproof Led Street Light,
IP66 Led Outdoor Area Street Lighting,
Die Casting Aluminum Waterproof Street Light
Road Outdoor LED street light housing IP66 Aluminum die-casting housing
80 90 100 wattage Street Light High Luinous Waterproof IP66 protection
|Color Temperature:||3000/40000/6500K||Input Voltage:||AC90 - 265V|
|Frequency Range:||50 - 60Hz||Working Ambient Temperature:||-40℃ - 50℃|
|Working Ambient Humidity:||20% - 90%RH||LED Lifetime:||50000h|
|Production Lead Time:||7-30 Days|
|Shipping:||EXW / FOB NINGBO|
|Finish Color:||Double gray;Sandy black;|
|Color Rendering Index||Ra≥70||Ra≥70||Ra≥70|
|Humidity of Working Condition||20%~90%RH||20%~90%RH||20%~90%RH|
|Installation Pipe Diameter||φ60mm||φ60mm||φ70mm|
Is there anything else you want to know about this lamp?
1. Q:What is the waterproof rating?
A: It’s can pass IP66
2. Q:How many years of warranty do you promise?
A: We guarantee the housing for 5 years.for the whole lamp,The warranty of electrical parts is depends on the warranty time of different driver brand.
3. Q:What is the grade of your powder coating?
A: Normal is C2 grade,but If the customer has special request,such as used at the seaside,in this case,we can use phosphating with Akzo powder to reach higher levels,like C3,C4.
4. Q:What's the packing you use?
A: Our packing is PE bags with foam and carton box,we will ensure it safe.
5. Q:What is your usual lead time?
A: 25 days for regular products, 10 days extra for special requirements.
6. Q:Do you sell only whole lamps?Or I can just buy the empty housing?
A: It’s up to you,we can also sell empty housing,even you just by the die-casting housing without powder coating is also no problem.
7. Q:What brand of driver do you use?
A: The brand we usually use is Inventronics,Sosen these China local brand,and PHILIPS,MEANWELL these international brand,Customers can also specify brands,it’s no problem.
8. Q:About the powder coating,i have a question,What colors do you usually use?Can we customize the color?
A: The colors we usually use are black and gray,you can also customize other color,just tell us the RAL number,we will according the RAL number to do the powder coating.
9. Q:Ok,that’s good,So if I want to specify a color,will you charge extra cost?
A: will not,but we will require MOQ500 pcs.
10. Q:ok,last question,Do you accept OEM?
A: Of course we can,we have own die-casting machine and mould design team,must be able to meet your requirements,and we already have a lot of OEM customers.
· Standard AC input of 90-305V,up to 480v available
· EMI filter: 47CFR, part 2, part 15
· Power factor: >0.9
· Total harmonic distortion: <20%
· Surge protection: IEC/EN 61000-4-5 EMC test standard
· Licensed electrician required for installation
· Rugged, fully sealed, die-cast aluminum housing
· UV-resistant, multi-layer, architectural color, powder coat finish
· High impact, heat resistant, tempered lens
Energy Control Options
· Motion detection available
· Photo sensors available
Contact Person: Ms. Jenny
Tel: 0086 13777291746